Panasonic NAMPS HH950 User Manual
Page 96
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Master Function
Keypad Sequence:
(M)
K TONE
5
JKL
Enter: C — }
. Lock •
ijQ9^?J CiD
CsT^
FCN 35
Master FCN
Set
< +, - or STO >
FCN 35-—==
Master FCN
Reset
< +, - or STO >
FCN 35=====
Master FCN
Clear
< +, - or STO >
FCN 35.
Master FCN
Cleared
Master Function allows setting levels and conditions of
functions such as volume level, ring tone, and numerous
others as "default" settings each time you power ON.
Master Function provides three different option settings:
• Set - Current function settings are stored to memory
as "master" function
• Reset - Current function settings change to agree with
master function as set with specific function set
• Clear - Each function is set to center level, Off, or
original factory default value (See Table 3.3).
1. To select desired settings, press i^| [^1 and
enter your lock code. Observe the current setting
appears on the display.
2. Press r+~) or CH) to toggle through the various
possible selections-Set, Reset, and Clear Reset will not
appear on the display unless master function has
previously been set.
NOTE: See
Table 3.3 for a complete listing of default settings
selected when you choose "Clear".
3. When the desired setting appears, press ® to save
in memory.
4. The phone automatically exits this mode after three
seconds.
Operation
Security (FCN 3) 3-63