Panasonic NAMPS HH950 User Manual
Page 115
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Signill
0
(=с=ч:
Auto RCL
2224444
Signal =
1
=
2224444
FCN 82=====!
Auto RCL
On
< + ,- or
L -
ST0>J
FCN S2'=it=ii=''=’'=
Auto RCL
Delay • 00 min
< digits,STO
>
FCN 82-c:
Tel No?
2224444
Keypad Sequence
Automatic Recall (Handheld Use Only)
СШ)
ВАТТ
2 ABC
^ :
enter
; ,,------
This feature provides a programmable 99-mmute
timer/alarm to remind you to place a specific call When
the alarm sounds, the specified number appears on the
display and a corresponding buzzer sounds for one minute
To silence the alarm, press any key except (W) To call
the particular number, simply press js^p]
1 To program Auto Recall, first enter the digits of the
desired number you’re calling
2 Press (TciT) [
2
^ Observe the currently-selected
on/off status appears on the display
3 Use the CT^ or CED keys to toggle between the two
choices-On or Off
4 When the desired choice appears on the display, press
5 When choosing ON, enter the delay time (between 1
and 99 minutes) for the timer to activate If you make a
mistake during entry, use C
clr
) key to correct
Press (W) to save to memory The message Tel No?
appears on the display to allow final verification of the
phone number If necessary, you may alter the number
at this point After confirming the number, press (W)
3-82 Clock (FCN 8)
Operation