Code : c, Notes – Panasonic NAMPS HH950 User Manual
Page 94
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Theft Lock
Keypad Sequence:
P
(M)
№NQ
4
OHI
EMTER:
3
LOCK
CODE : C + ;
ENTER
NUMBER
(M)
Theft Lock function allows totally disabling the phone to
eliminate the possibility of unauthorized use. Theft Lock
function may be set either ON or OFF. When ON, the
Theft Lock message appears on the display immediately
after powering ON. A theft tone "buzzer" will also sound
for ten seconds.
To override the Theft Lock feature, enter ycur Theft or Lock
code within ten seconds of the Theft Lock message
appearing on the display. If you miss the ten-second
window, power the phone OFF and then ON and try again.
In handsfree/car mount use only, the phone will
automatically proceed in making a call (from a formerly-
entered number) after the ten second period. This may be
helpful as an alarm to you if you are away from your phone
and an unauthorized person attempts to use your phone.
Simply enter the number where you can be reached and
the phone will automatically place a call to that number if
an attempt is made to use your phone.
When you or the called party answers, an Intercept tone
begins and continues for 50 seconds after which the call
terminates. In addition, if Horn Alert feature is active, the
horn or headlights will activate after the initial ten-second
period.
NOTES:
• Set
the Theft Code (see page 3-66) before setting the Theft
Lock Condition.
•
If Dial Lock, Send Lock, Full Lock, or Receive Lock is active,
the display shows the particular lock setting after overriding
Theft Lock.
•
With Theft Lock active, emergency override is disabled. In
other words, emergency calls cannot be made when Theft
Lock is active.
Operation
Security (FCN 3) 3-61