Panasonic KX-E2500 - Manual (Page 114)

B+ (EII-IEIO
Printing a Text with Insert Codes
Your text will print according to the selection of your MODE
selector. If the MODE selector is set on
NORM, the text will print
up to the point that the Insert Code was set. If the MODE selector
is positioned on
DISP or JSTFY, printing will stop at the beginning
of the line containing the Insert Code. At that point, you may
manually type the variable information or recall it from phrase
memory. Once the variable information is inserted, you simply
press the
PRINT key to resume printing.
1
Recall your text
2
Press PRINT
The text will print to the first Insert Code and your screen
will prompt you. If you did not assign a prompt to the loca­
tion, the screen will prompt:
INSERT
3
Type the variable information or recall it from phrase memory
To recall a phrase:
• Press CODE + 1-99 at the stop location
Your screen will prompt:
COPY
Phrase [XX] No
Press Y (for Yes)
4
Press PRINT to continue
5 Repeat steps 3 and 4 for each Insert Code
104