Panasonic KX-E2500 - Manual (Page 15)

Selector Switches
A total of five selector switches are located on the KX-E2500.
Line Spacing Selector
The Line Spacing Selector is located on the top left of the key­
board. It is marked 1, ]V2, 2, and 3 and is used to control the
number of lines between each RETURN.
You may also select from three different lines per vertical inch
settings which are accessed through the default menu discussed on
page 11. These choices and their uses are listed below:
5.25 — Legal Applications (court reporting)
6
— Normal Correspondence
8 — Used in conjunction with 15 pitch
Mode Selector
n
f
The Mode selector is located to the immediate right of the line
spacing selector. It controls your typing output by offering you
three modes of operation: NORM, DISP, JSTFY.
NORM Deactivates your display screen allowing you to type
directly on the paper. When you come to the end of a
line, a manual return is required.
DISP Accesses the display screen allowing you to view one
line of text before it is printed on the paper. DISP will
also trigger an automatic return at the end of each line.
JSTFY Works the same as the DISP mode. However, in the
JSTFY mode, your text will print with an even right
margin, giving your work a clean, professional look.