Correcting errors on a form, Correcting errors at a current stop position, Correcting errors at a previous stop position – Panasonic KX-E2500 User Manual
Page 158
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MAIN
MENÜ
11
Press MAIN MENU to exit the Form Layout
or
Auto Insert a second form and Press PRINT to continue from
the top of the form .
Correcting Errors on a Form
Correcting Errors at a Current Stop Position
Press CORRECT to delete characters to the left, or press QUICK
ERASE to delete an entire word to the left.
If the stop position has several lines of text, you may use the same
correction procedures as those outlined when making corrections
within the correction memory.
+
[SPACE
bar
"
Correcting Errors at a Previous Stop Position
1
Set the MODE selector at NORM
2
Press CODE + REVERSE INDEX ( f ) to reach the stop posi
tion containing the error
3
SPACE to position printer over the error(s)
4
Press the CODE
+
PRINT key to enter NO PRINT mode
5
Retype the error and press the CORRECT key to make your
correction
NOTE: If the text was typed in JSTFY, keep the MODE selector on
JSTFY, press CODE -I- PRINT and retype the entire line until
the printer returns. Press CORRECT until all characters are
deleted from the display and the printer advances to the end
of the previous line. Make corrections as you would within
the correction memory.
148