4 changing supplies, 4. changing supplies, Changing the ribbon cartridge – Panasonic KX-E2500 User Manual
Page 237
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
12-4 CHANGING SUPPLIES
Changing the Ribbon Cartridge
When reaching the end of the ribbon, the screen will prompt “LID
OR SUPPLY”.
1
Lift the top cover of your typewriter
2
Grasp the cartridge on both sides and lift it up and out of the
machine
3
To insert a new cartridge, place the front portion (where the
ribbon is exposed) between the card holder and the tape
guides. Snap the back end of the cartridge onto the printer.
4
Advance the thumb wheel on the cartridge clockwise until the
ribbon slack is tightened
Advertising