Changing the daisywheel – Panasonic KX-E2500 User Manual
Page 239
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Changing the Daisywheel
1
Lift out the ribbon cartridge
2
Pull the green lever that is located to the right of the printhead
towards you. Grasp the clear plastic cartridge and lift the
daisywheel, out of the machine
3
Place the plastic cartridge of another daisywheel in the carrier
with the characters facing the platen. Push the right side of
plastic cartridge down into the carrier and push the green
lever back into position
4
Replace the ribbon
5
Close the top cover
229
Advertising