Panasonic WV-CP160 - Manual (Page 12)

To enter a blank space in the CAMERA ID
Move the cursor to SPACE and press EJ.
To replace a specific character in the CAMERA iD
1. Move the cursor to the editing area by pressing or tS).
2. Move the pointer to the character to be replaced by pressing ^ or [^. Then move
the cursor to the character area and select a ne\w character,
3. Press EJ to determine the CAMERA ID,
To erase all characters in the editing area
Move the cursor to RESET and press E] ■ All characters in the editing area disappear.
To determine the display position of the CAMERA ID
1, Move the cursor to POSI, and press El ■
The display shown below appears and
the CAMERA ID is highlighted.
2, Move the CAMERA ID to the desired
position by pressing € 1 / ,
3, Press El io fix the position of the CAM­
ERA ID, The mode returns to the previ­
ous CAMERA ID menu.
Notes:
• The CAMERA ID stops at the edges of the monitor screen.
• The CAMERA ID moves faster if any of
is kept pressed for a sec­
ond or more.
2. Light Control Setting (ALC/ELC)
You can select the light control mode accord­
ing to the lens type.
ALC: If you use the auto iris lens, select this
parameter.
ELC: If you use a fixed or manual iris lens,
select this parameter.
1. Move the cursor to the ALC/ELC parame­
ter,
2. Select ALC or ELC,
** CAM SET UP **
CAMERA ID OFF 1
ALC/ELC ALC T
SHUTTER OFF
AGC ON
SENS UP OFF
IfHITE BAL ATW T
SET UP ENABLE