Shutter speed (shutter) – Panasonic WV-CP160 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3, Move the cursor to the area where
backlight is bright and press El to
mask that area. The mask turns to
white. (When the cursor is moved on
an area that has already been masked,
the mask and cursor start blinking.)
Blinking
4. Repeat step 3 to mask the desired
area. To cancel masking, move the
cursor to that area and press El •
5. After masking is completed, press
El
for 2 seconds or more. The ALC CONT
menu appears.
6. If you want to change the video output
level (picture contrast), move the "I"
cursor for LEVEL and adjust the level.
Note:
If ON is selected for the SUPER-D2 parameter, a shadow (black line) may appear at
the boundary between the bright and the dim scene. This is a natural phenomenon and
does not indicate trouble.
3. Shutter Speed (SHUTTER)
Move the cursor to the SHUTTER parame
ter and select the electronic shutter speed.
The preset values for SHUTTER change by
pressing ^ or as shown right.
Note:When ELC is selected for ALC/ELC or ON is selected for SUPER-D2, this item is not
available.
C
OFF
(V60)—^1/100
1/10000—1/4000 *
-*1/250
1/2000
■
* 1/500
1/1000
a