Installation procedure – Panasonic WV-CP160 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION PROCEDURE
Following explanation for installing the camera mounting bracket is for the installation on the
wall (A and B), but also applies equally to the installation on the ceiling, a shelf and stand.
1. Install the camera mounting bracket on
the wall with 2 screws.
Note:
The coaxial cable can be
passed through the center hole of
the camera mounting bracket.
2, Insert the camera fixing screw into the
camera mounting hole and tighten the
screw firmly.
Coaxial Cable
Fixing Screws
Camera Mounting
Bracket
3. Connect the camera and monitor with
the coaxial cable and turn on the
power switch of the monitor.
4.
While viewing the monitor picture,
loosen the angular control screw slight
ly. Adjust the camera’s angle to the
desired position, and then tighten the
screw firmly.