Panasonic WV-CP160 - Manual (Page 16)

6. White Balance Setting (WHITE BAL)
6-1. Auto-Tracing White Balance Mode (ATW)
You can select one of two modes for white balance adjustment as follows:
• ATW (Auto Tracing White Balance)
In this mode, the color temperature is monitored continuously and thereby white bal­
ance is set automatically. The color temperature range for the proper white balance is
approximately 2 600 - 6 OOOK. Proper white balance may not be obtained under the fol­
lowing conditions;
1.
2.
3.
The color temperature is out of the
2 600 - 6 OOOK range.
When the scene contains mostly
high color temperature objects,
such as a blue sky or sunset.
When the scene is dim.
In these cases, select the AWC
mode.
Move the cursor to the WHITE BAL
parameter and select ATW. The white
balance of the camera is automatically
set.
, ------------
'Ч
CAM SET UP **
CAMERA. ID OPP 1
ALC/ELC ALC 1
SHUTTER OFF
AGC ON
SENS UP OFF
ИН1ТБ BAL tATW n
END SET UP ENABLE
________
Automatic White Balance Control Mode (AWC)
In this mode, accurate white balance is obtained within a color temperature range of
approximately 2 300-10 OOOK.
Move the cursor to the WHITE BAL ___________________
parameter and select AWC
SW. PUSH
** CAM SET UP **
CAMERA ID OFF 1
ALC/ELC ALC T
SHUTTER OFF
ASC OH
SENS UP OFF
HSITB 8AL {AWC^PUSH"SW
END SET UP ENABLE
2. Press E] to start the white balance
setup. The PUSH SW is highlighted to
indicate that the white balance is being
set.
( --------------------------
— Ч
** CAM SET UP **
CAMERA ID OFF “Л
ALC/ELC ALC 1
SHUTTER OFF
AGC ON
SENS UP OFF
WHITE BAL AHC^PUSH ,SN
END SET UP ENABLE
/