Basic system, Connections – Panasonic WV-CP160 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
Caution:
Keep the POWER switch of the specified monitor, Camera Extension Unit and
Camera Drive Unit in OFF position while making connections. If the power of these units
is ON during connections, the camera does not function due to the built-in protection
circuit which protects it against wrong connections.
Basic System
Connect the coaxial cables between the camera and CAMERA IN connector of the
specified monitor or Camera Drive Unit. The approximate maximum cable length is as
follows:
Coaxial
Cable Type
Maximum
Cable Length
DC R/1000 ft. of
Inner Conductor
RG-59/U
RG-6/U
200 m (660 ft)
500 m (1 650 ft)
Less than 30 n
Less than 12 ii
The maximum DC resistance between the camera and these unit is 20 fl.
Cameras