Chapter 5: remote control, Foot switch control, Set up procedure – Yamaha FX550 User Manual
Page 30: Operation procedure
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 5: Remote Control
FX550 applications can be expanded through the use of foot switches and external MIDI
equipment. FX550 functions that can be remotely controlled are listed below.
Foot switch controlled Functions
MIDI Controlled Functions
[jJ Effect program select
[
2
j Tap tempo, speed switching, & ducking
[3] FX550 bypass
[jJ Effect program select
[¿) Tempo control
[3] PCL and PGR control
13 Parameter adjustment
[|] Volume control
[6] High-speed edit
Foot Switch Control
Use an optional Yamaha FC-5 foot switch.
[T] Effect Program Select
A foot switch can be used to select effect programs.
• Set Up Procedure
1. Press the [UTILITY] button. The F.SW FUNCTION display shown below will appear.
88
2. Press the [ ▼ ] or [ A ] button repeatedly until the MEMORY SELECT display appears.
3. Press the [UTILITY] button again. The MEMORY SELECT RANGE display shown below
will appear.
88
4. Press the [ -^ ] or [ ► ] button to position the cursor, and use the [ ▼ ] and [ ▲ ] buttons to
set the desired program number range.
When RANGE is set “62 TO 67”
62
-
63
-
64
-
65
-
66
->
67
When RANGE is set “67 TO 62”
67
66
-
65
-
64
-
63
-
62
5. Press the [PLAY] button to return to Play mode. The MEMORY SELECT RANGE settings
are stored automatically.
• Operation Procedure
1. Connect the foot switch to the MEMORY INC/DEC TRIGGER jack on the rear panel.
2. Play the guitar, and press the foot switch to select the effect programs specified by the
MEMORY SELECT RANGE. The specified effect programs will be selected one by one as
you press the foot switch.
28