The rear panel, Bypass jack, Memory inc/dec trigger jack – Yamaha FX550 User Manual
Page 7: Midi in connector, Dc 12v in connector, Cable clip, Phones jack, Phones level control, R&l(mono) jacks, Tuner out jack
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 1: Controls & Connections
The Rear Panel
© BYPASS jack
An optional Yamaha FC-5 foot switch can be connected
here and used to bypass the FX550. See “Foot switch
Control” on page 28.
© MEMORY INC/DEC TRIGGER jack
An optional Yamaha FC-5 foot switch can be connected
here and used to select effect programs or to set the
tempo parameter for the tempo delay and tempo modu
lation delay effects. See Chapter 5 “Foot switch Con
trol” on page 28.
® MIDI IN connector
An optional Yamaha MFC06 or MFC05 MIDI foot con
troller can be connected here. See “MIDI Control” on
page 32.
DC 12V IN connector
Connect the supplied power supply adaptor to this con
nection.
Cable clip
Thread the power supply adaptor cable through this clip
to prevent accidental disconnection.
© PHONES jack
A pair of stereo headphones can be connected here.
® PHONES LEVEL control
This control adjusts the volume level of the headphones.
® R&L(MONO) jacks
Connect the R and L(MONO) jacks to a stereo amplifier
or a pair of guitar amplifiers. If you are using a mono
amplifier, connect only the L(MONO) output.
These outputs can also be connected directly to a multi
track recorder or mixer for recording.
® TUNER OUT jack
Your guitar tuner can be connected to this connection.