Before requesting service – Panasonic NVRX10EG User Manual

Page 103

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ENGLISH

Before Requesting Service

Power Source

Symptom

Cause

Action

Page

• Movie Camera does not turn |

on.

►•When using Battery as power source:

Attached Battery is discharged.

•Attach fully charged Battery.

20

• Movie Camera has turned off |

automatically.

►•Recording was paused for more than 6

minutes.

•Turn Movie Camera off and then on again.

36

• Movie Camera quickly turns |

off.

►•Condensation has formed inside Movie

Camera.

•Wait until condensation has cleared up

(approximately 2 - 3 hours).

80

Cassette

• Remaining Tape Time ^

Indication is not correct.

►•Tape length of inserted cassette is not

correctly selected.

• Select correct tape length.

22

•X-ray inspection was done at ^

airport. Did it affect
cassettes?

►•No, it has no adverse influence.

•When playing back stored

►•Cassette may have been magnetized by

other equipment.

• Unfortunately, there is no remedy.

Store cassettes correctly.

78

► •Cassette was stored in unsuitable place.

• Unfortunately, there is no remedy.

Store cassettes correctly.

78

Recording

• Recording does not start ^

when pressing Start/Stop
Button.

►•Tab of inserted cassette is broken out.

• Insert cassette with intact tab.

Or cover hole with two layers of adhesive
tape.

24

• Date/Time or Title Indication f

is not displayed in Finder.

►•Incorrect operation of [DATE/TITLE] and/or

[PLAY/DISPLAY SELECT] Buttons,

• Press [DATE/TITLE] Button so that

Date/Time or Title Indication appears, and

then press [PLAY/DISPLAY SELECT]

Button until desired Indication appears.

32

•Date/Time Indication is not |

displayed in Finder.

►•Built-in lithium battery is discharged.

•Charge built-in lithium battery.

34

Playback

•When playing back from ^

Movie Camera to connected

TV, no playback picture is

reproduced on TV.

►•[POWER] Switch of Movie Camera is not

turned out.

•Turn [POWER] Switch out and press

[VCR/CAMERA] Button so that [VCR] Lamp
lights.

48

•When playing back from

Movie Camera to connected

TV, playback picture is 1

distorted or contains noise
bars.

►•Tape is loose.

•Tighten tape.

22

►•Video heads are dirty.

• Clean video heads with optional video head

cleaning cassette.

80

• Picture is not in colour. l|

i

►•Colour adjustment on TV is not made

properly.

•Adjust colour control on TV.

►•Tracking is not adjusted correctly.

•Adjust tracking correctly.

54

-103-

Advertising