Panasonic NV-SD450B - Manual (Page 12)

Infra-red Remote Controller
17
25
No function
, )o function
(
12
)
1 POWER (TV)
To switch the TV from on to standby mode or vice
versa. In standby mode, the TV is stilt connected to
the mains.
•With some TV models, it may only be possible to
switch the TV to standby mode using this button.
In this case, use TV/AV or v' ^ (TV) to switch the
TV on.
2 TV/AV
To select the TV input.
3 POWER (VCR)
To switch the VCR from on to standby mode or vice
versa. In standby mode, the VCR is still connected to
the mains.
4 OSD
For the On Screen Display Function.
5 REW (REWIND)
In the stop mode: To rewind the tape.
In the playback mode: To search backward.
In the rewind mode:
To obtain high speed picture,
is lit.
6 PLAY
To Start playback. ">” is lit.
7 PAUSE/STILL
During playback: Still picture.
During recording: To interrupt recording.
8 REC
To start a recording.
• Press both buttons simultaneously.
9 ^ ^ (VCR)
To select the required programme position (TV
station) of the VCR.
10 TRACKINGA/-LOCK
To adjust the tracking and the vertical locking,
(See page 19.)
11 SLOW
For the slow motion playback function. “Dt>" is fit
12 FF (FAST FORWARD)
in the stop mode: To fast forward the tape.
In the playback mode: To search forward.
In the fast forward mode: To obtain high speed
picture,
"[>i>"isnt.
13 STOP
To stop any playback or recording,
14 INDEX
For the index search function.
15 >x<TV)
To select the required programme position (TV
station) of the TV.
16 VOLUME
To adjust the volume of the TV.
17 Infra-red Transmitter
The programming data are transmitted from here to
the VCR.
18
To programme a timer recording.
19 DATE
To programme a timer recording
20 DISPLAY
To change the indication on the VCR Display.
|-^CIock^Counter^Remaining Tape Time---------------
1