Remote control mode, After all settings are selected – Panasonic NV-SD450B User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote Control Mode
1 Select Remote.
On Screen Dtsptay
0
_:
2 Select VCR1 or VCR2.
® 0
VCR1; Set to this position on both the VCR and remote
controller for normal use with one VCR.
VCH2: Set to this position when using two Panasonic
VCRs.
This allows to operate VCRi or VCR2 with
remote controller,
•After changing the remote control mode, press A or
T while holding TV SELECT to change the remote
control mode of the remote controller, if this is not
done, it will not be possible to operate the VCR using
the remote controller. (See page 13.)
After All Settings are selected
Press STORE, and then press EXIT to make On Screen
Display disappear.
r—^
STOPE
<
38
>