Connection to a decoder – Panasonic NV-SD450B User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Connections
Connection to a Decoder
C3i
c
fc
CD
CO
Aerial
TV Set (Not supplied)
Notes:
•"RGB” is an abbreviation for "RED/GREEN/BLUE"’
signals. If the TV with RGB input capability is connected
to AV1 and the unit with RGB output capability is
connected to AV2, the TV can receive RGB signal from
the unit through the VCR.
• Use full-wired 21 -pin AV cables for the connection.
•Selection of RGB or norma! video output is done by the
external equipment connected to AV2 terminal.
•RF OFFiTEST SIGNAL SWITCH
Switch to “OFP position only if interference beat occurs,
tiien viewing via 21-pin scart connection only.
<
9
)
Advertising