Panasonic NV-SD450B - Manual (Page 15)

Controls and Connection Sockets
CVC (Crystal view Control)
ON: Using the CVC function, playback and
recording are performed In the stale which
achisvss optimum picturo Quality in fipht of
characteristics of a tape.
•The CVC indicator is lit.
•This control should normally be left in the
ON position.
OFF: Turn off the CVC function.
•The CVC indicator is not lit.
^ TIMER REC
To turn the timer recording function on and off.
□ is lit or not lit.
Once operating flmer recording function, the normal
rtnafta+irtn ie> i mlAoe« fkilc Ki i+trttn io
V^l«W|_rC3(«ALIWII IlS IIV/L Wl II ■■•>3 k,/M LllvM I 1^
to off.
0) AUDIO DUB
To set up the VCR for audio dubbing.
A DUB is appeared on screen display.
^ INSERT
To set up the VCR for insert editing.
INSERT is appeared on screen display.
® PICTURE
To make picture sharper (SHARP) or softer (SOFT).
0 COUNTER RESET
To reset the tape counter (elapsed time) to “0;00.00".
•The tape counter is automatically reset to “0;00.00"
when a video cassette is inserted.
0 RFIN
To connect to the external aerial.
@ CHADJ.
To adjust the RF transmitting channel 30-42.
® RFOFF/TEST SIGNAL
RF OFF; Set to this position when the VCR is
cfflnnected to the TV via the 21-pin scart
cable.
TEST SIGNAL OFF;
Set to this position when the VCR is
connected to the TV via the RF coaxial
cable only.
TEST SIGNAL ON:
Set to this position when tuning the TV into
the VCR.
The test signal is transmitted on
channel 36 initially.
© AV1
CO
3-
This 21-pin scart terminal carries input and output
signals for both picture and sound. TV sets equipped
wjth p 3 jnfji! 3 r soGk0t G3.P* b6 conn6Gt6ci h0r8.
This is also called Scart ..... ...
Peritel
Euro Connector
Euro AV
20 tB t6 14 12 ICI 8 6 4 a
\ <> i> "{> O i> i> O <> i? €■
\p O O O O O i> O i> O O’ I
19 IT rs 13 11 0 7 B 3 1
1 AUDIO OUTPUT 13 RED GROUND
2 AUDIO INPUT 14 BLANKING
3 AUDIO OUTPUT GROUND
4 AUDIO GROUND 15 RED
5 BLUE GROUND 16 BLANKING
6 AUDIO INPUT 17 VIDEO OUTPUT
7 BLUE GROUND
8 SWITCHING VOLTAGE 18 VIDEO INPUT
9 GREEN GROUND GROUND
10 No connection 19 VIDEO OUTPUT
11 GREEN 20 VIDEO INPUT
12 No eonneciion 21 GROUND
Note; RED, GREEN and BLUE are inputs only.
© AC IN­
TO connect to the main power supply.
^ RFOUT
To connect to the aerial terminal on a TV set.
0) EDIT
By connecting the optional Editing Controller
(VW-EC300EA/W-EC310E) to this socket, such
editing functions as Assemble Editing. Insert Editing
and Audio Dubbing can be performed more quickly
and efficiently between two VCRs or between a VCR
eind a movie camera.
To connect the Edit cable (VW-K5E) to a movie
camera or to another VCR for One-Touch-Ediling.
0 AV2
To connect to a decoder or another VCR.
•The 21-pin list is same with AVI.
<
15
)