Panasonic NV-SD450B - Manual (Page 26)

Programming the Video
Dh lo.
I lUO
Dll
Programming is now easier than ever; simply enter the
PlusCode provided in the programme schedule column
carried by newspapers and magazines.
PlusCodes are numbers which are assigned to each
programme listed in the TV programme schedule carried
in newspapers and TV guides. When these codes are
entered and STORE is pressed, the codes are converted
into the actual programming.
Preparations
• Insert a cassette tape with an intact erasure prevention
tab.
•Confirm that the TV is on and the VCR viewing channel
is selected.
Operations Display Symbols
Press VIDEO PLUS+.
Enter a PiusCode.
Example; 920216
Press STORE.
Q
On Screen Dtspfay
•Confirm that the programming contents are correct
before setting the VCR to timer r^xirding standby
mode,
•The VCR will be in the timer recording standby
mode after about 1 minute
• if the “—■ appears in the programme position-
select the programme position of your VCR which
receives the TV station you entered at step 2 using
button A or ▼.
•To extend the ending lime or to make any
corrections, use buttons A ▼ ► or /n,. v.
date , ON, OFF.
Notes;
•To release from the standby mode, press TIMER REC.
•When the PlusCode is used for programming, the
recording time may be slightty longer than the actual
programme time.
•When programming two or more programmes, repeat
steps 1—3.
•The procedures for checking and cancelling a timer
programme are the same as on page 25.
<
26
)