Setting up, Connections, Tuning the tv to your vcr – Panasonic NV-SD450B User Manual
Page 7: Auto setup, Inrra-rea kemote controller, Controls and connection sockets, Connections tuning the tv to your vcr
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Up
i
5=
CD
Connections
Tuning the TV to your VCR
The VCR supplies a signal to the TV set via the RF
coaxial cable on channel 36 of the UK broadcasting
system. Your TV must be tuned into this channel in order
to view the VCR playback picture.
If the connection to the TV includes the 21 -pin scart cable,
the playback picture can be viewed by selecting AV on
your TV. The RF coaxia! cable must still be connected as
shown on page 8. but the TV need not be tuned to
channel 36.
Auto Setup
When the VCR is turned on after connecting the aerial
lead and the mains lead, Auto setup (Auto tuning and Auto
clock setting) starts.
inrra-rea Kemote controller
Controls and Connection Sockets
This gives a detailed explanation of the function of each
button, switch and connection socket.
(
7
)