Connecting to a compaq pc companion – Compaq MP1600 User Manual
Page 12
1-6 MP1600 Microportable Projector
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 11/12/99 10:18 AM
Part Number:383706-001 File name: BkCh1.doc
Connecting the Projector to a
Compaq PC Companion
To connect the projector to a Compaq PC Companion, the PC
Companion must have a male connector adapter and a VGA-out
PC Card with a 15-pin connector.
✎
The VGA-out PC Card with the 15-pin connector is not
included with the Compaq PC Companion. It is sold
separately. For information on purchasing this card, call your
Compaq authorized dealer, seller, or reseller. To locate a
reseller near you, call Compaq at 1-800-AT-COMPAQ or visit
the Compaq web site at
1. Connect one end of the signal cable
1 to the projector and
connect the other end to the VGA-out PC Card. The VGA-out
PC Card may be inserted into the PC slot on the Compaq PC
Companion before or after connecting the signal cable.
2. Connect one end of the power cord
2 into the back of the
projector, and the other end to an electrical outlet that is easily
accessible and close to the projector.