Compaq MP1600 - Manual (Page 18)

1-12 MP1600 Microportable Projector
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM
Part Number:383706-001 File name: BkCh1.doc
2. Raise the projector to the desired display angle, then press the
elevator button
1 on the front of the projector to release the
foot
2.
3. To lower the display angle, press the button on the front of the
projector again and press down on the projector to lower it.
! WARNING: To reduce the risk of the projector tipping or
overturning, always turn the elevator foot 90 degrees
from its original position before pressing the elevator
button.
✎ To fine-tune the leveling of the projector, hold the elevator
button in and adjust the leveling.