Compaq MP1600 - Manual (Page 48)

C-2 Using the Compaq Video Adapter
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 11/05/99 5:09 PM
Part Number: 383706-001 File name: Cappc.doc
Attaching the Video Adapter to the
MP1600 Microportable Projector
To attach the Compaq Video Adapter to the projector:
1. Push in the two buttons
1 on the bottom sides of the video
adapter.
2. Insert the hooks on top of the video adapter into the upper
slots
2 on the projector, then insert the adapter plug into the
digital connector
3 on the back of the projector.
3. Release the buttons
1 on the sides of the video adapter to
complete the connection.
After the video adapter is connected to the projector and the
projector is turned on, one of the LED lights on the adapter will
illuminate to indicate the adapter is operating.