On-screen menu adjustments – Compaq MP1600 User Manual
Page 25
MP1600 Microportable Projector 1-19
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 11/12/99 10:18 AM
Part Number:383706-001 File name: BkCh1.doc
IMPORTANT: To use standby mode, press the Standby button and,
after a six to ten-second delay, the unit enters standby mode and
the projector lamp turns off. A “Going to Standby” message
appears on the screen for the duration of the six to ten-second
delay. When the message disappears from the screen, there is a
45-second delay before the lamp can be turned back on. Wait 45
seconds to allow the lamp to cool before pressing the Standby
button again.
On-Screen Menu Adjustments
The adjustments for screen settings are located in the on-screen
menu and can be viewed in one of six available languages. The
following menu shows the functions at each level:
Main Menu
Menu Level 2
Menu Level 3
Adjustment scale
Adjustment scale
Horizontal Position
Vertical Position
Save and Return
Cancel
Adjustment scale
Adjustment scale
Zoom
Panning Left-Right
Panning Up-Down
Adjustment scale
Adjustment scale
Adjustment scale
Save and Return
Cancel
Adjustment scale
Dark - Light
7100 K
Custom Color
Saturation
Save and Return
Cancel
Adjustment scale
Adjustment scale
Clock
Clock Phase
Save and Return
Cancel
Adjustment scale
Adjustment scale
Continued