Compaq MP1600 - Manual (Page 49)

Using the Compaq Video Adapter C-3
Writer: Rebecca Wiggins Saved by: Marianne Silvetti Saved date: 11/05/99 5:09 PM
Part Number: xxxxxx-001 File name: Cappc.doc
Connecting a Video Player
✎ If your video player uses a round, one-prong composite video
connector, use the RCA video cable. If your video player uses
a round, four-prong S-video connector, use the S-video cable.
Both cables are included with the Compaq Video Adapter.
1. Plug the RCA video cable into the video-out port on the video
player and the video port on the video adapter. If you are
using the S-video cable, connect it to the S-video out
connector on the video player and the S-video port on the
video adapter.
2. Turn on the projector first, then the video player.
3. Push the Source button on the back of the video adapter to
switch the projector signal from data (computer icon) to video
(TV icon). The data mode receives computer inputs and the
video mode receives video input such as a TV tuner, VCR,
video, or camera.
With the Compaq Video Adapter attached, the projector is
compatible with major video standards such as NTSC, PAL, and
SECAM. Use the on-screen menu to adjust the video performance
manually or press the Resync button to optimize it automatically.