Compaq MP1600 User Manual
Page 35
Advertising
MP1600 Microportable Projector 1-29
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM
Part Number:383706-001 File name: BkCh1.doc
To replace the projector lamp module, follow these steps:
1. Turn off the power to the projector by pressing the Standby
button
1.
2. Allow the projector to cool down for at least 30 minutes.
!
WARNING:
The lamp assembly operates at a very high
temperature. To reduce the risk of personal injury, allow the
projector to cool down for at least 30 minutes before opening
the lamp cover. Never open the lamp cover while the projector
is operating or when the lamp is hot.
3. Turn off the main power switch
2.
4. Disconnect the power cord
3.
Advertising