Setting up the projector – Compaq MP1600 User Manual
Page 9
MP1600 Microportable Projector 1-3
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM
Part Number:383706-001 File name: BkCh1.doc
If your shipping box does not contain all of the listed items,
please contact your Compaq authorized dealer, reseller, or service
provider.
Setting Up the Projector
Instructions below and on the following pages explain how to set
up the projector. Separate setup instructions are described for the
following products:
Portable and desktop computer
Handheld computers with VGA capability
VCR, DVD, or camcorder (requires optional video adapter)
✎
The projector is hot pluggable and can be connected, while
powered on, to these products while they are powered on.
IMPORTANT: Place the projector on a stable desk or table at a
distance not less than 3.3 feet and not greater than 35 feet from
the projection screen.
!
WARNING:
To reduce the risk of electric shock or
damage to your equipment:
Do not disable the power cord grounding plug. The
grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed)
electrical outlet that is easily accessible at all times.
Disconnect power from the projector by unplugging
the power cord from the electrical outlet.
Do not place anything on power cords or cables.
Arrange them so that no one may accidentally step
on or trip over them. Do not pull on a cord or cable.
When unplugging from the electrical outlet, grasp
the cord by the plug.