Connecting to other video sources, Attaching the compaq video adapter – Compaq MP1600 User Manual
Page 13
MP1600 Microportable Projector 1-7
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM
Part Number:383706-001 File name: BkCh1.doc
Connecting the Projector to Other Video Sources
To connect the projector to a camcorder, DVD player, or VCR,
the Compaq Video Adapter must be connected to the projector.
The Compaq Video Adapter has been specifically designed to fit
the Compaq MP1600 Microportable Projector. This adapter
converts the signals from the camcorder for compatibility with the
projector.
✎
The Compaq Video Adapter is not included with the Compaq
MP1600 Microportable Projector. It is sold separately. For
information on purchasing this video adapter, call your Compaq
authorized dealer, seller, or reseller. To locate a reseller near
you, call 1-800-AT-COMPAQ or visit the Compaq web site at
Attaching the Compaq Video Adapter to the
MP1600 Microportable Projector
1. Push in the two buttons
1 on the bottom sides of the video
adapter.
2. Insert the hooks on top of the video adapter into the upper
slots
2 on the projector by inserting and pushing upward,
then insert the adapter plug into the digital connector
3 on the
back of the projector.
3. Release the buttons on the sides of the video adapter to
complete the connection.