Panasonic KX-P6100 - Manual (Page 15)

Setup
8 Remove disk #1 and insert the KX-P6100
software disk #2 into the same drive
13 Click OK
Click OK
10
Click
Panasonic KX-P6100 Tools ts created
11
Click
12
Click I Restart Windows | to restart
Windows.
Panasonic KX-P6100 TEST
_ Notice
The TEST Program prints test pages
Some operations may be slow due to
thorough testing
Instructions
Before clicking OK, make sure your
printer has been turned on, with paper
in the paper tray Otherwise, click
Cancel to return to the mam menu
OK Cancel
• If you want to test the printer, go to step 3 of
“Testing the Printer” below
Testing the Printer
You can test the connection between the PC and printer and view additional information about your PC and printer by
running the Test program
1 If Panasonic KX-P6100 Tools has been min­
imized, restore it by double clicking the
Tools icon
0
Panasonic KX-P6100 Tools
w
TEST
Panasonic
KX P6100
Print Manager
Panasonic
KX-P6100
TEST
Panasonic
KX-P6100
Status Display
Panasonic
KX-P6100PCL
Control Panel
^ Click
I
Yes
I
The Test program prints a configuration page
that shows information about your PC and
printer
g Click ¡ Yes
I
to continue.
The printer will print two demo pages
( c®* P 16)
g If you want to exit the Test program, click
[oH].
Clicking [Cancel | will return you to the Test
program’s mam screen
2 Double click the Panasonic KX-P6100 TEST
icon.
Make sure the printer is ready and paper is
loaded before clicking | OK I
Note:
• It IS recommended that you save a copy of the
most recent configuration page with your man­
ual as you may need it later
o
o
fi)
(Q
<
c
0)
(D
B
o
*3
5
"
a
5
'
(Q
<D
CO
o
€
0)
(D
(D
V)
5
'
(Q
(D
“□
5
’
(D
15