Panasonic KX-P6100 - Manual (Page 36)

Appendix
Printer Specifications
Printing Method:
Semiconductor Laser
Print Speed:
6 pages per minute (ppm) maximum (Letter size paper,
text mode, 5% image area, all originals)
Resolution:
300 dots per inch (dpi)
Paper Feed:
1 Multi-purpose tray up to 100 sheets
[75 g/m2 (20 lbs.)]
Paper Output:
Up to 50 sheets
Power Source:
Refer to the nameplate on the rear of the unit
Software Emulation :
HP LaserJet Series IIP
Fonts:
GDI mode
TrueType fonts in Windows
PCL mode
Courier 10 point, 12 pitch:
Regular, Bold, and Italic
Courier 12 point, 10 pitch:
Regular, Bold, and Italic
Line Printer 8.5 point, 16.66 pitch; Regular
RAM Buffer:
256 KB
Interface:
Bidirectional parallel
Operating Environment:
10 to 32.5'C {50 to90.5'F}
20 to 80% RH
Storage Environment:
Oto 35°C (32 to 95T}
lOto 80% RH
Dimensions:
132 (W) X 378 (D) X 287 (H) mm (5.2" x 14.9" x 11.3"}
Mass {Weight}:
Approx. 6.5 kg {14.4 lbs.}
Consumables/Life:
Starter toner 1,000 pages average (4% image area
with repetitive printing of 10 pages)
Toner cartridge; 2,000 pages average (4% image area
with repetitive printing of 10 pages)
Process unit; 15,000 pages average (4% image area
with repetitive printing of 10 pages)
4% image area means that the black area within the
printing area is 4%. Printing 8% image area continuously
will reduce the life of the toner and of the Process Unit to
about half as compare to printing 4% image area. The
“TonrSavR Mode" allows you to save the toner and to
maintain the life of the Process Unit. (
чж P. 29)
Power Consumption:
480 W TYPICAL (Printing with Fuser on)
9 W TYPICAL (Power Saving Mode)
Noise Level:
Printing;
Standby: 45 dBA
OdBA
CPU:
Intel N80C31BH-1 orN80C51BH-1 (13.309 MHz)
Power Saving Mode:
To conserve energy and reduce operating cost, this printer
is provided with a power save feature. If the printer has not
received data for 15 minutes, the printer will automatically
enter into a power saving mode.
Emulation means to operate like another printer.
*2 This toner is installed in the Process Unit at the factory before shipment of the printer.
36