Supplies, Note, Refilling the toner in the process unit – Panasonic KX-P6100 User Manual
Page 35: I remove the process unit from the printer, Appendix
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Appendix
Supplies
Please contact your local Panasonic dealer for availability
The following supplies have their own Instructions/lnstallation Manuals
Supplies
KX-P456
Toner Cartridge — 2,000 page life
KX-PEP2
Process Unit — 15,000 page life
Note:
• The page life above is based upon printing 4% image area with repetitive printing of 10 pages
Refilling the Toner in the Process Unit
When the print is faint, the toner may be almost empty However, the printer may print some pages if you shake the
Process Unit a few times Fill the toner in the Process Unit using the toner cartridge KX-P456
The instructions below are the outline procedure For detailed instructions, please refer to the KX-P456 instructions
manual
Extending the toner iife:
Shake the Process Unit
Refining the toner:
i Remove the Process Unit from the printer
{ Steps 1-5 on P 33).
0 Place the toner cartridge on the Process Unit
and slide the toner cartidge to the left until it
stops
О
■D
o'
о
Ш
о
Q.
(Л
c
■O
■D
Shake the Process Unit and tap the toner =
cartridge to let the toner fall into the Process co
Unit.
2 open the toner cover of the Process Unit.
0 Remove the toner cartridge by sliding it to
the right and lifting.
35