Panel – Panasonic Panafax UF-766 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ABOUT YOUR FAX MACHINE
Control
Panel
Q
LCD Display
Shows date and time, or the current operation.
@ POWER Lamp
Lights when the power is ON.
0
ON LINE Lamp
Lights when the machine is receiving or transmitting.
0 NO TONER Lamp
Lights when the toner has run out.
0
NO PAPER Lamp
Lights when one or both cassettes are empty or not
installed.
0
PAPER JAM Lamp
Lights when a recording paper jam occurs.
IRandIMODElW
Used to set total pages, reception mode, etc. Also used
to select sub-functions (i.e., instead of pressing the sub
function number key, you can scroll in opposite
directions by pressing either key repeatedly).
© lj=jgLKn-/SgTI
Used to change basic transmission settings.
© IDgffiCTORY SEARCH!
Used to search for a station name.
I©
IDISPLAYI
This machine is provided with a dual access mode (see
Note). After communication begins the date and time
will reappear. Press this key to check the current status
of the machine.
ID
Used to start or set the machine's functions.
0
Note: Tte dual access feature allows you to perform two
operations at the same time. Documents can he stored into
memory when the machine is dialling, receiving or
transmitting from memory.