Using the halftone setting, Using the verification stamp – Panasonic Panafax UF-766 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC FEATURES
Using the Halftone Setting
The halftone setting is useful when sending halftone
photographs or illustrations with grey tones. Your machine
is preset to HALF TONE=OFF. You can select either
quality
(64 step adjustments) or FAST (16 step
adjustments).
HALF TONE
DOCUMENT SET
HALF TONE-OFF
2
To change the setting,
HALF TONE
DOCUMENT SET
HALF TONE-QUALITY
or
until the display you want
appears.
DOCUMENT SET
HALF TONE-FAST
Press iggpYi to test the new setting.
Using the Verification Stamp
When you transmit the document by using direct
transmission, the verification stamp helps you to confirm
successful transmissions by putting a small ® mark at the
bottom of each successfully transmitted page. Your machine
is preset to STAMP=ON.
If you wish the verification stamp to operate when storing
documents in memory, see Setting Fax Parameters (page 68).
STAMP
DOCUMENT SET
STAMP-ON
To change the setting,
STAMP
DOCUMENT SET
STAMP-OFF
0
Note: To change the preset stamp setting, see page 68.
39