Deferred polling – Panasonic Panafax UF-766 User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADVANCED FEATURES
Deferred Polling
N0.^
[PI]
1:XMT/P0L 2:GR0UP
5c
6c
KO.-I
[PI]
1:XMT 2:P0LLIN6
7c
for polling.
The polling password
appears when it has been
previously set.
A temporary polling
password setting message
appears if it has not been
previously set.
Enter a temporary polling
password if required.
Example: [
7
] [H EE
START
POLLING
PASSWORD-1234
POLLING
PASSWORO-
8c
DEFERRED POLL [PI]
1:YES 2;N0
ND.-|
for deferred poUing. (
s t a r t
time
9c
Enter the start time using four digits.
Example: E E B B (10:00 p.m.)
lOc
Enter station(s) by using any combination of the
following methods:
• One-Touch key
• ABBR and 2-digits
Example: lABBRI and [T] |T]
START
TIME
22:00
[12](Station name)
I
Add more station numbers, if necessary.
You may use IMODEI0 or 0 to review the station(s)
entered before going to the next step.
If you find an error, press
displayed station.
lie
To store the station numbers.
to erase the
<t>STAat
12c
Enter the program name using One-Touch/
character keys (max. 15 characters) (see page 7).
Example: [P] [U [Oj ® [D ®
13c
To store the program name,
'--------
PROGRAM NAME
[PI]
PROG.Al
You can now set another Program key by repeating
the procedure from Step 3.
Press ISTOPI to return to standby.
To perform the setting: Make sure that no document
is on the ADF, then press the Program key.