Panasonic Panafax UF-766 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ABOUT YOUR FAX MACHINE
Connecting the Telephone Line and
the Power Supply Leads
1
Plug one end of die telephone line lead into
the telephone socket supplied by the
telephone company and the other end into the
line socket on the rear of the machine.
2
Plug one end of the power supply lead into
the receptacle on the left side of the machine
and the other end into an ordinary three-
prong AC outlet.
Turn the power switch to the "I" position to turn ON the power. The POWER lamp on the control panel wül light up and the
standby display (date and time) will appear after a short period of time.
You should keep the power ON at all times for receiving documents from other locations.
0 Note:
3. To connect an external telephone to the machine, break off the protective tab for the TEL socket on the rear panel
2. The line connecting method, the type of the telephone line lead vary depending on the country.
17