Panasonic Panafax UF-766 User Manual
Page 75
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADVANCED FEATURES
S
ome parameters, such as the resolution,
original (contrast), and veriJhcation stamp
parameters, can be temporarily changed by simple
key operations just before a transmission is made.
When the transmission ends, however, these
parameters return to their preset values. Other
parameters can be changed only by the procedure
described below.
Fax Parameters
Changing Fax Parameters
FUNCTION
I
Z
I I
1
I
FAX PARAMETERS
<1> START
FAX PARAMETER
NO.Hi
3
Enter a fax parameter number from the parameter table
(see pages 69 to 71).
Example: [T] then iSTAFTTl for RESOLUTION.
—
01 RESOLUTION
1;STANDARD
Enter the new setting value.
Example: [T| for FINE.
01 RESOLUTION
2:FINE
To cancel the digit entered, press
again from Step 2.
<b START
and then start
02 ORIGINAL
1: NORMAL
6 You can now return to Step 3 to set the next parameter.
Press to return to standby mode.
To print out a fax parameter list, see page 73.
6»