Paper specifications – Panasonic Panafax UF-766 User Manual
Page 137
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SUPPLEMENTARY INFORMATION
Paper Specifications
Basic Weight:
Thickness:
Moisture Content:
Smoothness:
Acid Content:
Fusing Compatibility:
Cutting Dimensions:
Grain:
Cut Edge Conditions:
Ash Content:
Curl:
Packing:
Size:
Photo Copying Paper 60 to 90 g/m^ (16 to 24 pounds)
3.7 to 5.5 mils (1 mil = 1/1000")
4% to 6%
100 to 300 Sheffield
5.5 pH minimum
Must not scorch, melt, offset material, or release hazardous
emissions when heated to 200 ®C {392 ®F) for 0.1 second
±0.0313 inch of nominal, comers 90® ± 4°
Long grain
Cut with sharp blades, no paper dust
Not to exceed 10%
No allowable curl toward side to be imaged (printed)
Polylaminated moisture-proof ream wrap
A4:
210
mm X
297
mm
Letter: 216
mm
x 279
mm
Legal: 216
mm
x 356
mm
Never use the following paper:
• Extremely smooth or shiny paper or paper that is highly textured
• Coated papers
• Letterhead using low temperature or thermography.
These materials may transfer onto the fusing roller and cause damage. Any pre-printed paper should use this
compatible with 200 ®C for 0.1 second.
• Damage or wrinkle paper, or paper with irregularities such as tabs, staples, etc.
• Multipart forms or carbonless paper.
• Paper with a cotton and/or fiber content over 20 %,
l'in