Sending a document by relayed transmission – Panasonic Panafax UF-766 User Manual
Page 98
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPECIALIZED FEATURES
Sending a Document by Relayed Transmission
Once you have recorded all the necessary parameters in accordance with the relay network you belong to, you can send a
document to two or more stations in the network system automatically, by using the procedure below. The operation is the
same as multistation transmission.
Once you have set up your network and are connected to a relay station, you can send faxes from the machine's memory.
1
Place the document face down on the ADF and adjust
the document guides.
2
Enter station(s) by using any combination of the
following methods:
• One-Touch key
• ABBR and 2-digits
• EHrectory search
• Program key
Example: l|il then One-Touch key
DOCUMENT SET
<27>{Stat1on name)
^START
‘STORE*
N0.014
P A R F S - n m
n
i?j
1.1
L
16-APR-1992 15:00
101
First the machine stores the document in memory.
Then it dials the relay station and sends the document.
After the transmission ends, your machine prints out a
RELAY XMT REPORT automatically and returns to
standby.
After the relay station finishes its transmission to the
end receiving stations, your machine prints out a
RELAY XMT RESULT report sent back by the relay
station and returns to standby.
Q1