Aviom 6416o - Manual (Page 47)

38 A
dvANced
F
uNctioNs
Advanced Functions
The available advanced functions for the 6416o Output Module are listed in
the table below.
Number Function
1
Clear A‑Net Resources ‑ Active Audio Channels and Virtual
Data Cables
2 Reserved for future use
3 Reserved for future use
4 Reserved for future use
5 Reserved for future use
6 Reserved for future use
7 Reserved for future use
8 Reserved for future use
9 Password Lock/Unlock
10 Password Edit ‑ Set New Password
11 Sample Alignment Lock ‑ Get Info
12 Sample Alignment Lock ‑ Get New Value
13 Sample Alignment Lock ‑ Use Stored Value
14 Sample Alignment Lock ‑ Use Default Value
15 Pro64 Operating System Update
16 Restore Factory Defaults
To exit without selecting a Function, press the C
anCEl
button. Pressing any
front‑panel button other than a channel activation button after the Function
button will also cancel the Function request.
Function Button
The Function button is used in combination with other front‑panel buttons
to access features of the user interface such as setting/changing the module’s
password, network‑wide password protection, and other Control Master
settings. Functions are mapped to the channel activation buttons; the exact
labeling of the buttons is determined by the I/O configuration of the module
(8‑channel versus 16‑channel, etc.).
To access the advanced functions, press the F
unCtion
button; its button LED will
light. Next, press the channel button (or button combination) that corresponds
to the desired function, followed by the E
ntEr
button to activate it.