Casio G'zOne Brigade - Manual (Page 157)

156
SETTINGS & TOOLS
NAM Selection
To select the handset’s NAM (Number Assignment Module) if the
handset is registered with multiple service providers:
1. From idle mode with the flip open, press the Center Select Key
[MENU], select Settings & Tools, then press the Center Select
Key [OK]. Press Phone Settings,  NAM Selection.
2. Select NAM 1 or NAM 2, then press the Center Select Key [SET].
NOTE
When PTT mode is on, you cannot change this setting.
Call Settings
The Call Setup menu allows you to designate how the handset
handles both incoming and outgoing calls.
Accessing the Call Settings submenu
1. From idle mode with the flip open, press the Center Select Key
[MENU], select Settings & Tools, then press the Center Select
Key [OK].
2. Press
Call Settings.
3. Select a submenu:
Answer Options/End Call Options/Auto Retry/TTY Mode/One
Touch Dial/Voice Privacy/PC Connections/DTMF Tones/PTT
Mode/Assisted Dialing
Answer Options
To set how to answer an incoming call:
1. From idle mode with the flip open, press the Center Select Key
[MENU], select Settings & Tools, then press the Center Select
Key [OK]. Press
Call Settings,  Answer Options.