Casio G'zOne Brigade - Manual (Page 67)

66
Push to T
alk
you into their Push to Talk contact list. Only one person can speak at
a time during Push to Talk calls. When using your phone keypad to
make a Push to Talk call, you must enter the ten-digit phone number
of the called party. Presence information may not be available for all
Push to Talk contacts. The timeliness of presence information may be
impacted by the network registration status of a Push to Talk contact.
Your Push to Talk service cannot be used for any applications that
tether your phone to computers or other devices for any purpose.
If you add the Push to Talk feature, coverage for your data services
will be limited to the National Enhanced Services Rate and Coverage
Area.
Making a PTT Call
You can make two types of PTT calls:
A barge call automatically connects to the other party. The called
party does not have the option to ignore the call.
An alert call is a call to notify a called party that the calling party
wants to talk using a tone. The called party has the option to answer
or ignore the call.
NOTE
You must first enable the PTT feature in order to see the PTT icons
and menus.
PTT Mode
You can use the following procedure to turn the PTT feature On or Off.
When PTT is turned on, you will be able to send and receive PTT calls
or alerts.
1. From idle mode with the flip open, press the Center Select Key
[MENU], select Settings & Tools, then press the Center Select
Key [OK]. Press
Call Settings,  PTT Mode.
2. Select On or Off, then press the Center Select Key [OK].
•
•