Casio G'zOne Brigade - Manual (Page 50)

49
CONT
ACTS
6. Select the entered phone number field and press the Right Soft
Key [Options] to select one of the following options:
Set Speed Dial/Set As Default/Add 2-Sec Pause/Add Wait
To add the Contact entry to the Speed Dial list, press  Set
Speed Dial. Select the desired Speed Dial digit by using the
keypad or by scrolling to highlight it, then press the Center Select
Key [SET]. Press the Center Select Key [OK] to select Yes.
To set the phone number as the Default Number, press  Set
As Default, then press the Center Select Key [OK] to select Yes.
To add a pause to an existing number, press  Add 2-Sec
Pause or Add Wait.
NOTE
The initial phone number entered when the new Contact is created
becomes the Default Number. If more than one number is entered
for the Contact entry, another number can be selected as the
Default Number.
7. After entering the information as necessary, press the Center
Select Key [SAVE] to save.
8. CONTACT SAVED appears on the display. The phone number
reappears on screen. Press the End/Power Key to exit, or press the
Send Key to make a call to the displayed phone number.
•
•
•