Casio G'zOne Brigade - Manual (Page 70)

69
Push to T
alk
If the phone number you entered has already been registered in
your PTT Contact List, the contact name will replace the phone
number entered on the display when you initiate the call by
pressing the Red Side Key/PTT Key .
4. Release the Red Side Key/PTT Key  to let the other party
talk.
5. Press the End/Power Key to end the call.
NOTE
With the flip open, you can also perform the same operation by
pressing the Red Side Key/PTT Key .
Calling from Keypad (Alert)
1. From idle mode with the flip open, enter the 10-digit phone number
of the Verizon Wireless PTT subscriber you wish to alert.
2. Press the Left Soft Key [Alert].
3. Press and release the Red Side Key/PTT Key  to alert the
individual.
The “PTT Outgoing Alert” tone will sound, and “Alerting” will
appear on the display.
If the phone number you entered has already been registered in
your PTT Contact List, the contact name will replace the phone
number entered on the display when the alert is initiated.
4. If the called party answers the alert, “Listening to” appears on the
display and you will hear the called party speaking.
If the called party chooses to ignore the alert, or if the phone is
unavailable to accept a PTT call, an “Unavailable” message will
appear on your display.
5. When the called party finishes speaking, you will hear the “Floor
Available” tone and the “Connected to” screen will appear on your
display.
6. Press and hold the Red Side Key/PTT Key  to talk.