Casio G'zOne Brigade - Manual (Page 69)

68
Push to T
alk
5. If the called party answers the alert, “Listening to” appears on the
display and you will hear the called party speaking.
If the called party chooses to ignore the alert, or if the phone is
unavailable to accept a PTT call, an “Unavailable” message will
appear on your display.
6. When the called party finishes speaking, you will hear the “Floor
Available” tone and the “Connected to” screen will appear on your
display.
7. Press and hold the Red Side Key/PTT Key  to talk.
8. Release the Red Side Key/PTT Key  to let the other party talk.
9. Press the End/Power Key to end the call.
Calling from Temp PTT Group (Barge)
1. From idle mode with the flip open, press the Red Side Key/PTT Key
 to access your PTT Contact List.
2. Press the Right Soft Key [Options], then press  Temp PTT
Group.
3. Press and hold the Red Side Key/PTT Key . Wait until the
“OK to Talk” tone sounds and the message “Talking to” appears on
the display. Speak while holding the Red Side Key/PTT Key .
4. Release the Red Side Key/PTT Key  to let the other party
talk.
5. Press the End/Power Key to end the call.
Calling from Keypad (Barge)
1. With the flip closed, to unlock the handset, press the Center Select
Key, and then press  at the prompt.
2. Enter the 10-digit phone number of the Verizon Wireless PTT
subscriber you wish to contact.
3. Press and hold the Red Side Key/PTT Key . Wait until the
“OK to Talk” tone sounds and the message “Talking to” appears on
the display. Speak while holding the Red Side Key/PTT Key .