Configuring the sample data export analysis – Cannon Instrument CAV-2000 User Manual
Page 114
CANNON
®
Automatic Viscometer Models CAV-2100 and CAV-2200 with VISCPRO
®
Instruction & Operation Manual
Version 2g — May, 2009; CANNON
®
Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
108
Configuring the Sample Data Export analysis
1. Select Analyses from the VISCPRO
®
menu options.
2. Select View Analysis from the Analyses menu options
3. Double-click Data Export Package from the list of available
analysis types.
4. Select the Sample Data Export analysis option.
5. Click the Define and Open New Configuration radio button
to
define a new analysis configuration.
NOTE
If you have already configured and saved an analysis, its name will
appear in the list box on the right side of the window. If you click on an
existing configuration and click OK, the analysis will be performed using
the selected configuration settings. It will not be necessary to complete
the remaining steps in this procedure.
6. Click OK. The ASCII Ports Output Configuration window will
appear.
The ASCII Ports Output Configuration window consists of three
tabbed pages:
Date Filter—allows you to select date/time parameters for the
analysis.
Sample Filter—allows you to select which tubes/technicians/tests
will be included in the analysis.
Port Output Format—allows you to select the output port(s), what
sample data will appear in the output analyses, and how the data will
be displayed/sent.
7. Click on the tab corresponding to the filter you wish to set and
complete configuration options per the following instructions:
Date/Sample filters
a.
Complete selection of Date and Sample filter options per the
instructions in Chapter 6.
Port Output Format filter
b. To select other analysis configuration options, click the Port
Output Format tab.
Adding ports
c.
Click Add Port from the Port Output Format button options to
open the Select Port window. Select the desired serial port(s) and/
or files for output and verify the configuration settings for each.
Then Click OK. Added ports will be displayed in the port list box.