Adjusting security settings, Print/print setup options – Cannon Instrument CAV-2000 User Manual
Page 45
39
CANNON
®
Automatic Viscometer Models CAV-2100 and CAV-2200 with VISCPRO
®
Instruction & Operation Manual
Version 2g — May, 2009; CANNON
®
Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
To use the Log Out feature, click Log Out from Main. The current user
will be logged out of the security list of authorized CAV technicians and
managers. The software will automatically reset to the lowest security
level. Any ongoing test operations will continue.
Adjusting Security Settings
VISCPRO
®
provides an interface to customize security settings for your
facility. To adjust the security settings for your VISCPRO
®
software,
complete the procedure below:
1. Log in as a Manager.
2. Click Service and select the desired instrument. Then click Set
Security Levels.
The Set Security Levels window will open.
3. To make changes to security settings displayed in the window, click
the current security level for the software option you want to change;
then click the desired setting (Technician or Manager) from the drop-
down box displaying the security levels. When you are done, click
OK to save your settings or click Cancel to exit the Set Security
Levels window without making changes.
NOTE
There are no SERVICE security settings that are modifiable by the user.
The Set Security Options window
Print/Print setup options
Select this standard Windows
®
print option to access the Windows
®
window. Then select print options for the currently-active analysis/report
(see Analysis options).