Cannon Instrument CAV-2000 User Manual
Page 57
51
CANNON
®
Automatic Viscometer Models CAV-2100 and CAV-2200 with VISCPRO
®
Instruction & Operation Manual
Version 2g — May, 2009; CANNON
®
Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
The Tray Settings: Wash window (Dual Solvent options shown)
Solvent fill time(s)
The Solvent fill time(s) setting determines the amount of time that
solvent will be introduced into the viscometer tube during each rinse
cycle. Acceptable values are 1 to 30 seconds.
Solvent soak time(s)
The Solvent soak time(s) setting determines the amount of time that
solvent will remain in the viscometer tube prior to the solvent flush
during each rinse cycle. Acceptable values are 1 to 30 seconds.
Solvent flush time(s)
The Solvent flush time(s) setting determines the amount of time pressur-
ized air will flush the remaining solvent from the viscometer tube following
the solvent soak. Select a value from 1 to 60 seconds for this option.
Final dry time(s)
The Final dry time(s) setting determines the additional amount of time
forced air is channeled through the viscometer tube to dry it at the
conclusion of the rinse/dry cycle. Select a value from 15 to 300 seconds
for this option.