Cannon Instrument CAV-2000 User Manual
Page 127
121
CANNON
®
Automatic Viscometer Models CAV-2100 and CAV-2200 with VISCPRO
®
Instruction & Operation Manual
Version 2g — May, 2009; CANNON
®
Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
The Error Page tab
You may also type filter information directly into the Selected . . .
list boxes. Position the cursor in the desired field and use the key-
board to input entries. You may use wildcards (%,_) to select a range
of samples. For example, S% would include data from all samples
starting with S. %S% would include data from all samples contain-
ing S. The underscore (_) is a single-character wildcard.
You may use multiple IDs separated by a comma. For example,
AV%,40C% would display all samples beginning with AV or 40C.
NOTE
If no error sources/technicians are selected, the analysis will display data
for ALL error sources/technicians.
Port Output Format filter
c.
To adjust other analysis configuration options, click the Port
Output Format tab (see Figure, next page):
Adding ports
Click Add Port from the Port Output Format button options to
open the Select Port window. Select the desired serial port(s)
and/or files for output and verify the configuration settings for
each. Then Click OK. Added ports will be displayed in the port
list box.
Configuring output
d. Select the desired port/file for configuration by clicking the name
of the port/file in the port list box. Then click the radio button